Handheld Weather Station

• Handheld weather station * 1
• Portable suitcase * 1
• Data cable * 1
• Certificate of conformity * 1
• Warranty card * 1

During the transportation of the handheld weather station to the place of use, it must be placed in a special packaging box. After opening the packaging box, do not discard any packaging materials. It can be reused when it needs to be transported frequently. After arriving at the place of use, take the device out of the suitcase, turn on the power switch and start detecting field data.

1. Long press the “ON/OFF” power button, and after hearing a “beep”, the device turns on.

2. For RS-HSQXZ-USB-2-5S-EX handheld weather station wind direction measurement: Before measurement, check whether the wind direction part is vertically connected to the rebound top rod of the anemometer wind cup, and pull down the locking knob to turn it to the right to lower the wind direction dial. At this time, the wind direction dial can rotate freely. Under the action of the built-in magnetic rod, the final dial will coincide approximately with the east, west, south and north directions. At this time, the azimuth reading is performed through the pointer connected to the wind vane when the wind direction pointer is stable. After the observation is completed, in order to protect the equipment, the rebound top rod needs to be rotated to the left to rebound and reset.

3. Other element measurements: After power-on, the device enters the main interface, and polls the instantaneous wind speed, average wind speed, instantaneous wind level, average wind level, corresponding wave height, temperature, humidity, and air pressure element values ​​in sequence on the main interface.

4. After the measurement is completed, long press the “ON/OFF” power button, and the device will shut down after hearing two “beep” sounds

5. Connect the computer via a data cable to export the data. After use, the device should be placed in a suitcase to avoid damage to the device.

The time and battery level are displayed at the top of the screen. Data will be displayed on the screen and refreshed in real time, including instantaneous wind speed, one-minute average wind speed, instantaneous wind level, one-minute average wind level, corresponding wave height, temperature, humidity, atmospheric pressure, altitude, wind direction, and wind direction reading. You can also click the up and down buttons to change pages.

The stored data can be exported into “TXT”, “Excel” or “Pdf” formats through the “Handheld Weather Station Data Management System” software.

1. It is recommended to clean up the data storage every time you need to record the time when starting the machine to prevent the large amount of data from being exported when the current data is needed, which will take too long.
2. Please read this manual carefully before use to ensure that the sensor is inserted into the corresponding sensor interface and the battery is in the correct direction
3. When the battery is low, please replace the battery in time to prevent battery leakage from damaging the instrument
4. The handheld weather station is a precision device. Please do not disassemble it by yourself when using it to avoid damaging the product

You can set the password, data storage interval, screen off time, parameter calibration, system language, temperature unit, storage information viewing, buzzer on/off, system time modification, storage data clearing, reference altitude input, and temperature, humidity and atmospheric pressure data display on and off by pressing buttons.

The dimensions of the portable suitcase we provide are: 47.5×17.5×15.5 cm

Please contact us to obtain the manual.